Jump to content
  • Sky
  • Blueberry
  • Slate
  • Blackcurrant
  • Watermelon
  • Strawberry
  • Orange
  • Banana
  • Apple
  • Emerald
  • Chocolate
  • Charcoal
jibeh

TS2020 Joystick & Raildriver Interface

Recommended Posts

loud06    168

a la fin de l'extraction, il m'affiche ce message puis en mettant sur continuer, ça se ferme, mais le raildriver n'est pas détecté.

kxi2.jpg

Share this post


Link to post
Share on other sites
Gandalf    2,099

Ben t'as pas installé la 1.0.3, ou pas correctement..... j'avais la même erreur avec la 1.0.2

Share this post


Link to post
Share on other sites
loud06    168

Ben mince alors j'ai simplement décompresser l'archive dans un répertoire sur un autre disque que celui de ts (pas gênant à priori) et il a trouvé le chemin de ts tout seul.

Qu'y a t-il à faire de plus ?

Le précédente version a bien fonctionné. Pour la desinstallation, j' ai simplement effacé le répertoire.

Share this post


Link to post
Share on other sites
Gandalf    2,099

Quand tu le lances, tu as bien version 1.0.3 indiquée en haut de la fenêtre?

Share this post


Link to post
Share on other sites
loud06    168

je regarderai ce soir mais je pense que oui car je lance l'exécutable à partir du fichier décompresser, soit le 1.03

Share this post


Link to post
Share on other sites
loud06    168

bon ben ça marche nickel, j'avais pas mis en 1.03 mais j'étais en 1.02 comme tu l'avais dit plus haut....

merci

Share this post


Link to post
Share on other sites
loud06    168

bonsoir

sur la dernière ligne de dtg sortie ce jour peninsula corridor, et avec la loco GP38-2, le frein du train (le frein principal) ne fonctionne pas correctement, et visiblement le soucis est quand on le désserre, la manette virtuelle bouge tout le temps.

je viens d'essayer une autre loco ça le fait également.

bien sûr j'ai fait reconnaitre le répertoire par le raildriver interface auparavant.

si vous avez une idée..

merci

 

ps : il le fait avec macroworks comme le raildriver interface

 

sinon la ligne est superbe, vivement tsw optimisé

Edited by loud06

Share this post


Link to post
Share on other sites
Gandalf    2,099

Damned, là je n'ai pas ce matos donc je ne peux pas aider. Probablement un mapping ou les notches à revoir manuellement.

Share this post


Link to post
Share on other sites
Gandalf    2,099

Vous l'aviez probablement constaté, throttle et freins n'étaient pas très stables, même sans toucher au levier, ça sautait (très) souvent d'un cran à l'autre, et le réglage de sensitivité semblait inefficace. Avec les locos qui font un "clac" ou pire un bon "SHHHHHHHHH" quand les crans changent, c'était assez insupportable. Eh bien bonne nouvelle, après pas mal d'échanges avec Chris sur le sujet, le problème est réglé! La nouvelle version devrait sortir imminemment. C'est beaucoup plus agréable.

  • Like 1

Share this post


Link to post
Share on other sites
loud06    168

au fait j'ai solutionner moi même le soucis des locos sur la peninsula corridor, il se trouve qu'il faut "calibrer" le raildriver différemment il faut mettre le minimum du frein en laissant la manette légèrement au dessus du minimum, et là plus de soucis.

Share this post


Link to post
Share on other sites
Gandalf    2,099

TS 2017 Raildriver Interface V 1.0.5 released

This is a minor update that does the following:
1. Corrected error in the “Raildriver Sensitivity” setting not working correctly (Thanks to Crrispy for pointing it out). All users of V1.0.4 can try setting this to zero and then if you get any jumping of the lever in the cab, try incrementing it by 1 and try again.

2. Made updates to the manual in the following sections to better explain them.
Page 9 AssignedTo.
Page 11 Advanced Mode.
Page 13 Lever Map Error.

As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.

Download from https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0

  • Like 1

Share this post


Link to post
Share on other sites
Gandalf    2,099

TS 2017 Raildriver Interface V 1.0.6 released

Fixed error in “Direction” not working correctly when set to “Reversed” and “Use Notches” set to No. (Thanks to gwrdevon for pointing it out).
As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.
Download from https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0
Chris

  • Like 1

Share this post


Link to post
Share on other sites
Gandalf    2,099

Sacré S.A.V. :-)

 

TS 2017 Raildriver Interface V 1.0.7 released


1. Fixed error with program locking up on start up while waiting for TS to load.
2. Fixed two error when reassigning levers.

2a. If there were 2 or more levers belonging to the same ControlGroup then they would both be renamed to the one clicked on. For example if you have a VirtualThrottleAndBrake and a ThrottleAndBrake and you wanted to reassign them to the loco brake then if you clicked the VirtualThrottleAndBrake, the ThrottleAndBrake would be renamed to VirtualThrottleAndBrake. Most of the time this is not a problem as the second control is usually disabled.

2b. If you decided to reassign the ThrottleAndBrake lever and anything was already assigned to the Throttle or Dynamic Brake then these should have been assigned to nothing but were not.

As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.
Download from https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0
Chris
  • Like 1

Share this post


Link to post
Share on other sites
Gandalf    2,099

TS 2017 Raildriver Interface V 1.0.8 released

1. Added a 2 second delay to the program when TS starts to allow the controls in TS to settle when the scenario starts.
2. Minor fix to stop the juddering of the levers some experience when the sensitivity is set to zero and the DSD not working.
3. Added updated Canadian Pacific lever map to fix missing VirtualBrake.

As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.
Download from:- https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0

Share this post


Link to post
Share on other sites
Gandalf    2,099

Bonjour,

 

Pour les locos Tchèques de Pikku, ajoutez ça à la fin du fichier settings\FolderNames.txt:

 

FolderName=ElektrickeLokomotivy

 

Puis ensuite extract single folder et sélectionner Pikku. Pour certaines locos (ex la CSD 424), il faut aussi éditer le lever map pour enabler les controls, je ne sais pas pourquoi, mais ensuite ça fonctionne bien :)

Share this post


Link to post
Share on other sites
Gandalf    2,099

TS 2017 Raildriver Interface V 1.0.9 released

1. Added “FolderName=ElektrickeLokomotivy” to FolderNames.txt to allow for Pikku locomotives
2. Fixed FolderNames.txt not saving properly
3. Changed edited engine scripts to use previous_update = Update instead of old_update = Update to avoid clashes with third party scripts

As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.
Download from:- https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0
Chris

Share this post


Link to post
Share on other sites
Gandalf    2,099

Bonjour,

Ca fait un moment que je n'ai pas posté ici, peu de temps pour TS depuis cet été et pour quelques temps encore..

Chris a fusionné ses 2 programmes joystick interface et raildriver interface, celà s'appelle désormais logiquement "TS201x joystick and Raildriver interface".

En résumé c'est très simple, ça permet de mapper n'importe quels axes et boutons de joysticks à n'importe quel contrôle de TS. Le Raildriver étant désormais considéré comme un joystick standard à x axes et x boutons.

Les possibilités sont énormes et vont bien au-delà du raildriver, puisqu'on peut rajouter n'importe quels axes ou boutons de contrôle pour peu qu'ils soient vus comme un joystick par Windows. Pour ceux qui veulent se faire un cab panel, le pied :) Ou pour contrôler les leviers additionnels d'une vapeur avec un hotas par exemple. Etc.... si seulement on avait ça avec TSW... j'espère qu'ils vont publier une api pour faire ça!

Sinon avec juste un Raildriver,  ça se comporte comme le programme précédent et ça marche toujours super bien. Seul truc, la première fois il faut assigner manuellement les axes et les boutons par défaut, ça prend quelques minutes puis c'est fait pour tout.

Ca se télécharge ici: https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0

A installer à part de l'ancien programme, ce n'est pas une upgrade.

  • Like 2

Share this post


Link to post
Share on other sites
Ladoga    31

J’ai le Raildriver

Mes premières impressions sont que c’est du matos de qualité digne des US de la belle époque.

Style Peterbilt

 

Gros problème est que je voulais retrouver la sensibilité des manettes de la vie réelle.

C’est-à-dire de pousser ou retenir en pourcent avec une certaine résistance à la pression

Ou en gros tu tires et ne passes pas de 13 à 27…  Mais passe par une montée en puissance

 

Las c’est complètement raté

 

C’est donc la même chose qu’une manette de jeu

Cependant il y a quelque chose en plus qu’une manette de jeu

Share this post


Link to post
Share on other sites
Gandalf    2,099

TS2017 Raildriver and Joystick Interface V2.1.3 released

16/01/2018 V2.1.2 not released.
1. Fixed DSD device sounding when DSD enabled on some loco’s.
2. Added an option to the KeyMaps\ButtonMap menu that enables you to create a copy of an existing button map thereby keeping all the currently assigned buttons, useful if you need to make a copy with just a few changes.
3. Added script fixes for the AP Class 43 Enhancement Pack that will reset the DVD timer when the throttle or brake are moved.
4. Fixed external alerter sounding all the time when you exit a scenario with the alarm sounding. Simply click the Stop Callback button and the alarm will now stop.

27/01/18 V2.1.3 released
1. Added AWS fix for Virgin Train Pack.
2. Updated page 1 with regards to the ideal location to extract the program too.
3. Major improvements to code, the program now only uses 0.5% - 1.5% of CPU cycles instead of 12% - 14%, this also means that frame rate drop is now only 1-2 frames.

As usual, all existing users simply extract the files in the download to you current folder overwriting all existing files.
Download from https://www.dropbox.com/sh/cbwyvjrt3x6g ... -rBqa?dl=0
 

Share this post


Link to post
Share on other sites
Gandalf    2,099

Que veut dire "100% compatible"?

Si la question est "est-ce que 100% des engins conduisibles fonctionnent directement avec ce soft sans rien régler", la réponse est non :-)

Share this post


Link to post
Share on other sites

×