- Sky
- Blueberry
- Slate
- Blackcurrant
- Watermelon
- Strawberry
- Orange
- Banana
- Apple
- Emerald
- Chocolate
- Charcoal
![](https://www.railsim-fr.com/forum/uploads/monthly_2017_11/S.png.720dd89f7f6d442111d370348dc856a4.png)
springer6
Membre-
Content count
44 -
Donations
0.00 EUR -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Everything posted by springer6
-
-
-
Merci beaucoup pour cette locomotive fantastique. La présentation et les scripts sont exceptionnels. Le concept de la porte de la salle des machines est brillant. J'ai le même problème que celui de la BB66000. Le moteur semble parfois s’effacer, mais c’est un problème mineur. Tout le reste fonctionne très bien. Merci encore pour votre excellent travail.
- 5 comments
-
Greviste, Success !!! Merci Beaucoup ! springer6
-
Hello, I have downloaded the latest version of this file by Julien416 i.e. V 4.1. I have installed all the components ( including the ,geopcdx files) of the download into TS2019, but the loco will not show up in the sim, as if the .geopcdx files were missing. I thought that maybe this loco was not compatible with TS19, but there is someone on You Tube using the loco on the M-A route in TS19. Any ideas on what I might be doing wrong ? Thanks for any replies
-
-
BR151 Lokomotion (018,056,074)
springer6 reviewed springer6's file in Locomotives diesels et électriques
-
Version 1.0.0
440 downloads
Requerir: TS2019--DTG , European Loco Asset Pack -- DTG Inclus sont les "reskins" du BR151 par défaut en 3 versions de la livrée "Lokomotion". Lokomotion 018, Lokomotion 056 et Lokomotion 074. Ils peuvent être utilisés comme AI ou par ceux qui préfèrent conduire une locomotive moins complexe. Remarque: Les fichiers de texture pertinents pour chaque locomotive "BR151-1-Railion.TGPCDX" et "BR151-2-Railion.TGPCDX" peuvent être utilisés dans certaines versions plus avancées du BR151, MAIS PAS TOUT. Les utilisateurs sont invités à utiliser ces textures dans leurs propres versions du BR151 et peuvent les publier (avec l'autorisation des développeurs de locomotive bien sûr), à condition que je sois crédité pour la production des textures. -
-
-
Olaf , If you have erased the DTG 648 completely, why not try uninstalling it then re-installing it via Steam. If the Default loco then works oK, you can then unpack the .ap file fully again and then install the SNCF variant following my instructions. If the SNCF still causes problems delete all again and just re-install the default. Thinking about you problem. Sometimes TS20XX can be very persistent in following previously set paths. That is why people are advised to always delete the blueprints .pak and Clear the game cache after installing anything. If you go for a complete re-install one step at a time ( Default first and test then SNCF after fully unpacking the .ap, the delete blueprints and clear cache each time ), you will probably find that everything works. It would be a shame not to use the default loco since you have bought it. It is not that bad, although it is not as good as the Railtraction version. springer
-
Olaf, Did you fully extract all the contents of your .ap file ? In Assets\DTG\BR648Pack01 you should have a "Audio", "InputMappers","Lights", "Particles","PreLoad",RailVehicles",,"Weather" folders as well as the .ap file. In the RailVehicles folder there is a "Diesel" folder. In that you should have "BR648" and "SNCF". In the SNCF\Engine you should have copied in the 2 .GEOPCDX files. If you have all that, then make sure you have deleted the blueprints.pak file from the main folder and then cleared the game's cache after you have finished all the above installation changes. If after checking and doing all that, you still do not have any horn or diesel engine sounds, I do not know what to suggest ?? I have just re-installed my reskin again as per above and I have all the sounds as they should be. Good luck springer
-
Olaf , If you have no sound, did you extract all the "BR648Pack01Assets" .ap file or just drag the RailVehicles bit out of the archive? If it was the latter, try completely unpacking the .ap file by using the "Extract Here" method I described. The reskin's .bin file calls for the audio ( and other items) from the main "BR648Pack01" folder. Sometimes a .bin file will not look inside the .ap file, so you may have to extract everything in the .ap to get all the features to work. The sounds are fine for me (when all was extracted) and of 150 downloads , no one else has complained of no audio. Let me know if you solve it. Be aware also that the DTG BR648 has an unusual start up procedure. You have to operate the engine start lever and then release it for a few seconds before it starts. Also the handbrake is on by default ! No mention of this in the manual ! I posted on Railsim-fr rather than Railsim-de as it is of course for use on French routes and primarily on Steam Workshop scenarios where DTG published content has to be used. Nevertheless , until we have something better, I use it as an X73500/X73900 substitute. The single unit Railtraction BR640 would have been a better choice, but that cannot be used in the Steam Workshop. springer
-
-
Olaf , When you go into Assets\DTG\BR648Pack01 you will find "BR648Pack01Assets" Type =AP File. You need to unpack this .ap file, as you do with all DTG and most other downloads, before you can install any add-ons or reskins. To unpack an .ap file, first make sure you have a suitable program installed. "7-zip " is a good one and it is free. When you have 7-zip, right click on the .ap file , hover on 7-zip and then left click on "Extract Here". All the contents of the .ap file will then appear in your BR648Pack01 folder and you can follow my installation instructions. Apologies for not mentioning .ap files. I wrongly assumed that most people knew you had to unpack them before making any changes or add-ons. Note : If you don't want to unpack the whole .ap file, you can also select "Open Archive" rather than "Extract Here". You will then be able to just drag just the "RailVehicles" folder from the displayed archive into your BR648Pack01 folder. I hope this helps ? Best wishes springer6
-
-
Baba Selecta,
Voir la version 1.1. Vous devez utiliser le fichier .geopcdx à partir de la loco "Silver" et non le fichier par défaut.
-
Version 1.0.0
1,938 downloads
Il s'agit d'une peinture fictive des voitures Default Kuju Avmz, représentant des voitures typiques de la SNCF TER. Ils sont principalement destinés à être utilisés dans les scénarios d’ateliers Steam pour les lignes DTG Françaises, où le contenu Steam doit être utilisé.- 1 review
-
- 2
-
-
-
-
-
Version 1.0.0
626 downloads
Une "reskin fictif" de la DTG/RSC MRCE ER20 Eurorunner qui représente une locomotive diesel moderne, typique de la SNCF FRET. Il est principalement destiné à être utilisé en tant que locomotive dans les "Steam Workshop" scenarios des routes Françaises de DTG.Où le contenu de "Steam" doit être utilisé. -
Version 1.1.0
486 downloads
Une "reskin fictif" de la Kuju BR101 qui représente une locomotive électrique typique de la SNCF FRET. Il est principalement destiné à être utilisé en tant que locomotive dans les "Steam Workshop" scenarios des routes Françaises de DTG.Où le contenu de "Steam" doit être utilisé. -
-